A lap/shoulder combination belt with a
latchplate that can slide freely along the belt requires the locking clip, unless your vehicle’s seat belt can be converted in another way that is described in your vehicle owner’s manual. See your vehicle owner’s manual to find out if your vehicle belt can be converted to prevent movement of the lap portion of the belt. Otherwise, the locking clip MUST
be used.
10.To install the locking clip:
a.Tighten the buckled vehicle belt by pushing down hard on the car seat and pulling hard on the shoulder belt.
b.While continuing to push down on the car seat, let go of the shoulder strap and pinch the two straps together just behind the buckle tongue.
c.While still pinching the straps together, unbuckle the vehicle belt. Do not allow the straps to slip.
d. Connect the lap | |
belt to the shoulder |
|
| |
belt by placing the |
|
locking clip on the |
|
belts about ½ inch |
|
from the buckle |
|
tongue as shown . |
|
½
inch
29
