Graco 8480 Plate on the rear Seat ‹, Be sure that the vehicle seat back is locked in position

plate) on the rear of the	‹
seat ‹.

7. Store the harness in a cool dry place until it is needed again. Then reinstall by reversing these instructions. See the illustration on page 46 to check the correct path for the harness.

6.2Securing Your Child and the Booster Seat with the Vehicle Lap/Shoulder Belt

1.Use of the tether is not required when using the seat in this mode; however, it may keep the seat more stable. See section 5.3, step 11, “To secure the tether” (page 31) for instructions on tether use.

2.Place booster seat firmly against the back of a forward-facing vehicle seat suitable for the booster seat as explained in section 4, “Selecting a Suitable Location for the Car Seat” (page 13) and equipped with a lap/ shoulder belt. DO NOT place booster seat in a seating position that only provides a lap belt. If a front passenger seat is used, slide the vehicle seat rearward as far as possible from the dashboard.

3.Be sure that the vehicle seat back is locked in position.

40