Step 5.
Gather your unit together.
Do not force.
If unit will not fold, look for a partially latched top rail. Squeeze the latch button to release the rail.
Step 6.
To Cover Your Pack ’N Play®
Models with changing table and wheels:
Pull the cover over your unit as shown, making sure carry handle attached to Pack ’N Play mattress is lined up with zipper.
Before pulling bag up, insert |
|
folded changing table into the |
|
side opposite the handle as |
|
shown. Pull bag up to cover |
|
end. Zip together. | Handle |
Find the bottom corner belt loop (only one). This loop is for holding unit and mattress together while carrying.
Step 7.
Wrap the mattress around your unit. Fasten together the VELCRO® straps, attaching the bottom strap to the bottom corner belt loop.
CARE AND MAINTENANCE
FROM TIME TO TIME CHECK YOUR PACK ’N PLAY for worn parts, torn material or stitching. Replace or repair the parts as needed. Use only Graco® replacement parts.
IF PACK ’N PLAY IS USED AT THE BEACH, you MUST clean sand off your Pack ’N Play, including the feet, before packing it into cover. Sand in top rail lock may damage it.
Models with wheels only:
Turn unit upside down, so that wheels point up. Pull the cover over your unit. Make sure carry handle attached to Pack ’N Play mattress is lined up with zipper.
Push the plastic end of the bag over wheels and feet. Turn unit over and pull bag up to cover end. Zip together.
Models with feet or casters and feet:
Pull cover over your unit. Be sure carry handle attached to Pack ’N Play mattress is lined up with zipper. Turn unit over. Pull bag up to cover end. Zip together.
Wheel
Foot
Handle
TO CLEAN PACK ’N PLAY, use only household soap or detergent and warm water.
TO WASH CARRY BAG AND FITTED SHEET, machine wash in lukewarm water on delicate cycle and
On certain models:
The cargo bag opens on either end. Slip the bag over the Pack ’N Play. Check that the carrying handle attached to the Pack ’N Play mattress sticks out the hole in the bag. Zip both ends.
7 | 8 |
