3.1 Removing and Attaching Base

 

To remove infant restraint, squeeze handle at

back of seat and lift infant restraint from base

as shown .

 

To put infant restraint in base, push infant

 

restraint down until it clicks into base. Pull up

 

on infant restraint to be sure it is latched

 

firmly into base.

 

3.2 Adjusting Handle

1. Press handle adjustment buttons on both sides of handle .

2. Rotate handle until it clicks into any of the 5 positions:

Position A: MUST be used

when carrying by handle,

Position B,C,D: are convenience

E: positions, Position is the sitting position, NEVER use positions B or C

in the vehicle.

BOTH handle adjustment buttons must pop out to lock handle in place .

3. Push and pull onthe handle to be sure it is locked firmly in position.

 

 

Carrying

B

A

 

 

C

 

 

D

 

 

E Sitting

10

Page 42
Image 42
Graco AlanoTM owner manual Removing and Attaching Base, Adjusting Handle