Releasing the parking brake | Graco Bugaboo Stroller manual

other functions

		13	eng
releasing the parking brake		a
a	Grip the handle tightly with one hand. Press the white,	a
	round button on the handle with the other hand and
	move the handle towards the handlebar.
b.	The parking brake is now off.

Note If you press the white, round button on the handle without holding the handle tightly, the parking brake will be released suddenly. To avoid injury, do not place your fingers between the handle and the handlebar.

Note Release the Bugaboo Gecko’s parking brake before removing the big wheels from the axle.

adjusting the parking brake

a.	Place the handlebar above the big wheels.
	Screw the brake cable adjuster upwards. The brake	b
b	Screw the brake cable adjuster upwards. The brake	b
	cable is on the thin axle, next to the wheel on the right.
	This reduces the braking force.

c.Screw the brake cable adjuster down to increase the braking force.

WA R N I N G S

•Only apply the parking brake when the stroller is stationary. The brake lever must be in its lowest position to lock.

On product says: Brake is parking brake only. To be used only when completely stopped. Brake must be in furthest downward position to be locked.

Image 15

Graco Bugaboo Stroller manual Releasing the parking brake, Adjusting the parking brake

Contents

Fres eng English Español FrançaisPage English eng Eng Content Introduction Before you startBox with the bugaboo gecko comprises the following parts Eng Eng Assembly and use Place the chassis with the 4 points on the floor Basic stepsChassis Folding out the chassis and handlebar Swivel wheels Placing the swivel wheels in the holders‘click’ Other functions Big wheels with pneumatic tiresFitting the big wheels to the axle ‘click’ ‘click’ Unfolding the chassisInflating the tires Deflating the tires Push the parking brake’s handle away from you Downwards Parking brakeApplying the parking brake Push your foot against the axle of the swivel wheels Releasing the parking brake Adjusting the parking brake Fitting the frame on the chassis Frame Placing the frame in different positions Removing the frame from the chassis Turning the frame aroundPick up the frame Practicing Assembling the bassinet Attaching the bassinet fabric to the frameFitting the mattress See on fitting the sun canopy Fitting the apron Placing the seat fabric on the frame Assembling the seat WA R N I N G S Bassinet Various uses of bassinet and seat 3 positions are Seat Using safety belts Using the seat safety belts Waist belts. Tighten the belts to fit the child’s length Attach the shoulder belts over the child’s shoulders to Fitting the under seat bag Fitting the underseat bag Wheel position Going outdoors with the bugaboo geckoCity position Rough terrain position Fitting the seat Wrist strap Surface that is difficult to traverse, or snow Attach the elastic bands to the front of the canopy Clamps Protection against weather and windSun canopy Fitting the sun canopy Rain cover Fitting the rain cover over the sun canopyPull out the sun canopy Fitting the rain cover over the sun canopy’s frame Slide the holes of the rain cover frame overFinally, pull the wide, black edge over the foot end Frame Pull the frame apart Using the air vent in the rain cover Fitting the mosquito net Mosquito net Collapsing the seat Travelling and storageCollapsing the seat or bassinet Folding the chassis and wheels Grasp the center shaft on which the frame bearers are Cleaning the fabric MaintenanceSafety Cleaning Present accessories are Accessories Limited Warranty Comment