Assembling the seat | Graco Bugaboo Stroller specification

eng

3. assembling the seat

20

The seat comprises the seat fabric, which is pulled over the frame. The seat fabric is fitted with back pad supports, foot support and seat pad. The seat has 2 shoulder belts, 2 waist belts, 1 crotch belt and 1 tensioning belt with metal O-rings. When fastened together, the waist belts should stay in place at the height of their attachment.

step 1 placing the seat fabric on the frame

a. Place the frame on the floor.

b	Slide the rounded upper side of the seat fabric over the	b
	round side of the frame, with the Bugaboo logo facing
	forward. Pull on the seat fabric so that it fits tightly.

c	Fit the steel seat pad support into the round hole on the	c
	inside of the frame. Do the same on the other side.

d	Place one O-ring of the tensioning belt over the	d
	protruding pin on the side of the frame.

e.Place the frame on that side to fasten the O-ring on the other side.

f.Lean on the frame and push it inwards a little. Take hold of the tensioning belt and pull the other metal O-ring over the protruding pin.

Image 22

Graco Bugaboo Stroller manual Assembling the seat, Placing the seat fabric on the frame

Contents

English Español Français Fres engPage English eng Eng Content Before you start IntroductionBox with the bugaboo gecko comprises the following parts Eng Eng Assembly and use Folding out the chassis and handlebar Basic stepsChassis Place the chassis with the 4 points on the floor Placing the swivel wheels in the holders Swivel wheels‘click’ Big wheels with pneumatic tires Other functionsFitting the big wheels to the axle Deflating the tires Unfolding the chassisInflating the tires ‘click’ ‘click’ Push your foot against the axle of the swivel wheels Parking brakeApplying the parking brake Push the parking brake’s handle away from you Downwards Adjusting the parking brake Releasing the parking brake Frame Fitting the frame on the chassis Placing the frame in different positions Turning the frame around Removing the frame from the chassisPick up the frame Practicing Attaching the bassinet fabric to the frame Assembling the bassinetFitting the mattress Fitting the apron See on fitting the sun canopy Assembling the seat Placing the seat fabric on the frame WA R N I N G S Various uses of bassinet and seat Bassinet Seat 3 positions are Using the seat safety belts Using safety belts Attach the shoulder belts over the child’s shoulders to Waist belts. Tighten the belts to fit the child’s length Fitting the underseat bag Fitting the under seat bag Rough terrain position Going outdoors with the bugaboo geckoCity position Wheel position Fitting the seat Surface that is difficult to traverse, or snow Wrist strap Fitting the sun canopy Protection against weather and windSun canopy Attach the elastic bands to the front of the canopy Clamps Fitting the rain cover over the sun canopy Rain coverPull out the sun canopy Slide the holes of the rain cover frame over Fitting the rain cover over the sun canopy’s frameFinally, pull the wide, black edge over the foot end Frame Using the air vent in the rain cover Pull the frame apart Mosquito net Fitting the mosquito net Folding the chassis and wheels Travelling and storageCollapsing the seat or bassinet Collapsing the seat Grasp the center shaft on which the frame bearers are Cleaning MaintenanceSafety Cleaning the fabric Accessories Present accessories are Limited Warranty Comment