Graco Bugaboo Stroller manual Frame, Fitting the frame on the chassis

eng

frame

14When the frame is fastened to the chassis; the chassis is then secured. The bassinet or seat fabric is fastened to the frame. The frame has 2 frame supports, which ‘click’ onto the 2 frame bearers. The round side of the frame is always the head end of the bassinet or seat.

step 6 fitting the frame on the chassis

aSqueeze together the squeeze-fastener on the center shaft. This releases the frame bearers.

b. Place the frame bearers in the upright position.

cLet go of the squeeze-fastener. You will hear a ‘click.’ The frame bearers are now locked.

a

c

‘click’

‘click’

WA R N I N G S

•Check that the frame is attached to the chassis. Pick up the frame. If the frame releases one or both sides of the chassis, press the frame onto the chassis again until you hear a ‘click’ on both sides.