8.2 Storing LATCH

1.For ease of storing, extend LATCH to its maximum length.

2.Locate the storage

bars on back of car seat ™.

3.Fasten ends of LATCH onto storage bars as shown.

4.After fastening onto storage bar, pull on adjustment belt to make sure LATCH is securely fastened.

5.LATCH storage

should look like this when complete ™.

™

Storage bars

8.3 Airplane Use

This restraint is certified for use in Motor Vehicles. It is certified for use in Aircraft ONLY when used with the built-in harness. When used as a booster without the harness, this restraint is NOT certified for use

in aircraft because there is no shoulder belt available.

Important points to remember:

1.Airlines have some restrictions about the use of car seats.

2.Install your car seat on an airplane in the same way it is installed in an automobile with a lap belt (see Section 6.2, Securing the Car Seat in Your Vehicle, pp. 22-23).

3.Check that the airplane seat belt holds the car seat securely in place at all times.

32

Page 32
Image 32
Graco Car Seat/Booster manual Storing Latch, Airplane Use, Locate the storage Bars on back of car seat ™, Latch storage