Graco Car Seat/Booster manual Thread Latch, Hook Latch, Belt must lay flat and not be twisted

6.2.2 With LATCH

1.For ease of installation, extend LATCH to its maximum length.

2.Place the car seat firmly against the back of a forward-facing vehicle seat.

3.Thread LATCH

through the belt path normally used for the vehicle seat belt ™.

Belt must lay flat and not be twisted.

4.Hook LATCH

Connectors to vehicle lower anchors. Pull firmly on Connectors to be sure they are attached š.

5. Tighten LATCH by pushing down hard on car seat and pulling the adjustment belt ›.

6.NEVER put two LATCH connectors on one

vehicle LATCH anchor unless specifically allowed by the manufacturer œ.

™

š

›

œ

24