4.1 Adjusting Handle
1.Press handle adjustment buttons on both sides of handle .
2.Rotate handle until it clicks into any of the
4 positions:
Position A: MUST be used
when carrying by handle, Position A,B,C,D: may be used in vehicle
BOTH handle adjustment buttons must pop out to lock handle in place .
3. Push and pull on the handle to be sure it is locked firmly in position.
Carrying | B | |
A |
C
D Sitting
4.2 Removing and Attaching Infant Restraint
To remove, squeeze release handle at back of | |
infant restraint and lift out of base as shown . |
|
To put infant restraint in base, push infant restraint down until it clicks into base. Pull up on infant restraint to be sure it is latched firmly into base.
16
