Sending Workout Data to Your Computer

Note: You must download software as instructed so that the necessary USB drivers are installed before connecting the USB ANT Stick to your computer.

1.Plug the USB ANT Stick into an available USB port on your computer.

2.Bring your FR60 within range (5 m) of your computer.

Note: If Power Save Transfer is activated, your FR60 must be in regular time mode to transfer data to your computer. See page 24.

3. Follow the on-screen instructions.

Using the Heart Rate Monitor

The heart rate monitor is on standby and ready to send data. Wear the heart rate monitor directly on your

Getting Started

skin, just below your breastplate.

It should be snug enough to stay in place during your activity.

Tab

Heart Rate Monitor Strap

Slot

Heart Rate Monitor (Front)

Electrodes

Heart Rate Monitor (Back)

1.Push one tab on the strap through the slot in the heart rate monitor. Press the tab down.

2.Wet both electrodes on the back of the heart rate monitor to create a strong connection between your chest and the transmitter.

3.Wrap the strap around your chest and attach it to the other side of the heart rate monitor.

FR60 Owner’s Manual

7