Replacing the FR60 Battery

All of your settings are preserved, except the time of day.

Note: Before replacing the battery, save all of your data to your computer or to history (see page 22).

Note: Garmin recommends that you replace the battery in a low- humidity environment to prevent condensation from forming inside the watch.

1.Use a small Phillips screwdriver to remove the screws, from the FR60 back cover.

Appendix

2.Carefully lift the back cover, and remove the battery.

Note: Be careful not to move the red O-ring gasket in the battery compartment.

Note: Be careful not to contaminate the O-ring gasket. Any contamination could compromise the performance of the watch.

3.Replace the battery with the positive side facing up.

Note: Make sure the gasket is seated correctly in the gasket trough before screwing the back plate on.

4.Replace the back cover and the four screws ensuring the gasket is in place. Do not over tighten the screws. (Garmin recommends a torque of 1 in.-lb.)

FR60 Owner’s Manual

31