17.Place cylinder (17) sideways in a vise with soft jaws.
18.Lubricate seal (18) and place it on bottom of cylin- der (17). (Cylinder is symmetrical so either end can be the bottom.)
19.Slide displacement rod (1), piston assembly (T), intake valve assembly (R), and priming piston rod (24) into cylinder (17) from bottom until mating sur- faces of rod guide (19) and cylinder (17) meet.
1
17
Repair
21.Lubricate seal (18) and place it on top of cylinder (17). Insert outlet housing (2) on to cylinder. Install six long capscrews (45) through outlet housing (2) and into intake housing (22). Using a socket wrench, torque screws oppositely and evenly to
L500SS and L500SM models: install washer (46) 
between capscrews (45) and outlet housing (2).
45 
46
2
18
T 
19
R
18
17
22
24 |
|
|
|
| ti111159a |
FIG. 26
20.Put intake housing (22) upright in a vise, making sure it is
1
17
19
24
18
20
22
ti10582a
FIG. 27
ti10584a
FIG. 28
22.Lubricate throat packings (M), and install them in throat cartridge (3) one at a time with the lips of the
312375J | 15 |
