Using AC Adapters
•The Parent Units can use either a 9 volt battery or standard 120 volt AC household current. The Nursery Unit uses standard 120 volt AC household current only. The included AC adapters must be used for this purpose.
•To use AC adapters, plug the connector on the cord into the AC adapter jack on the side of the unit. Then plug adapter into a standard wall outlet.
•Use ONLY the Graco adapters included with the unit. Do not use these adapters with other equipment under any circumstances.
•If units do not work, check that AC adapters are plugged into working outlets.
•When electricity is off (from a power failure, etc.), the transmitter will NOT work, since it only operates on AC current.
•If the power light is blinking, turn the unit off and back on.
Selecting Channels
•Check that both Nursery Unit and Parent ’s Unit are set to the same channel.
•To change channel, slide Channel button to either A or B on BOTH units.
Low Battery Indication
•When battery is low in the parent unit the green power light will blink continuously and the speaker volume will be muted automatically.
•You may either turn off the unit and replace the battery or plug in the A/C adapter.
•When the unit is turned back on the green power light will stay on and the volume will return to normal.
7 |
