Graco P39LCS, P40RCM, P20LCM important safety instructions Models

Models

Models

Check your pump package’s identification (ID) plate (located on side of air motor) for the 6-digit part number of your pump package. Use the following matrix to define the construction of your pump package, based on the six dig- its. For example, pump package P29RSM represents the pump package (P); a pressure ratio of 29:1 with an NXT3400 motor and a 250cc displacement pump (29); a low noise motor with remote DataTrak (R); and a displacement pump

constructed of stainless steel (S) with MaxLife® coatings, packings, and enclosed wet cup (M).

Some configurations in the following matrix cannot be built. See the Product Selection Guide for available systems.

PART NO.		SERIAL	SERIES
MAX FLUID WPR	MAX AIR WPR		RATIO
MPa		MPa
bar		bar
PSI		PSI	GRACO INC.
			MPLS, MN
			Artwork 293287

ID plate located on side of air motor.

To order replacement parts, see Parts section starting on page 22. The digits in the matrix do not correspond to the Ref. Nos. in the Parts drawings and lists.

P		29			R		S		M
First
Digit	Second and Third Digits				Fourth Digit		Fifth Digit		Sixth Digit
									Coatings,
	Pressure		Displacement						Packings,
	Ratio		Pump Volume		Motor / Remote		Displacement		Enclosed Wet
	(xx:1)	Motor	(cc)		DataTrak		Pump Material		Cup
	05	NXT200	60	L	Low Noise; NO DataTrak	C	Carbon Steel	S	Severe Duty®
	11	NXT400	60	R	Low Noise;	S	Stainless Steel	M	MaxLife®
					Remote DataTrak
	14	NXT3400	500	M	Low Noise; Data Trak
	20	NXT700	60	S	Low Noise, High Level
					Sensor
	23	NXT2200	200	D	De-Icing; NO Data Trak
	26	NXT6500	500	E	De-Icing; Data Trak
P	29	NXT3400	250
	36	NXT3400	200
(pump)
	38	NXT1200	60
	39	Premier	500
	40	NXT2200	100
	55	NXT6500	250
	61	NXT1800	60
	63	NXT3400	100
	68	NXT6500	200
	82	Premier	250

312376L 3