Graco 1750365, PD104815A owner manual Instructions for use

Figure 5

Figure 6

Figure 7

Figure 8

Figure 9

Instructionsfor use

Please do not use this ear thermometer when the ear canal is wet.

1. Press and release the Power/

Scan button. The system will start it’s self-testing cycle (see Fig. 5).

2. Once the self-testing is completed (approximately 1 second), the thermometer will beep and the display will show the last temperature recorded. This indicates the thermometer is ready to take a temperature (see Fig. 6).

3. Press the Power/Scan button again. The symbol will appear beneath the last reading (see Fig. 7). The word “Lo” may also appear indicating the temperature is lower than 93.2°F (34°C) (see Fig. 8). NOTE: The word “Lo” by itself does not mean that the battery is low and needs to be charged unless the low battery icon appears with it (see Fig. 2). It means that the temperature being measured is out of the thermometer’s range.

4.Insert the probe into the ear canal. The probe must be inserted well into the ear to allow the probe tip to continuously scan the ear canal. This will ensure an accurate temperature measurement (see. Fig. 9).

11