3.3 Removing and Attaching Base
To remove infant restraint, squeeze handle at back of seat and lift infant restraint from base as shown ➊.
To put infant restraint in base, push infant restraint down until it clicks into base. Pull up on infant restraint to be sure it is latched firmly into base.
➊
3.4 Adjusting Handle | ➋ |
1.Press handle adjustment buttons on both sides of handle ➋.
2.Rotate handle until it clicks into any of the 5 positions:
Position A: MUST be used
when carrying by handle,
Position B,C,D: are convenience positions,
Position E: is the sitting position,
NEVER use positions B or C in the vehicle.
BOTH handle adjustment buttons must pop out to lock handle in place ➌.
3.Push and pull on the handle to be sure it is locked firmly in position.
A | B | ➌ |
Carrying |
|
|
C
D
E Sitting
13
