3.5 Attaching Canopy (on certain models)
1.Infant restraint comes with four (two on certain models) identical canopy support parts.
Thread one canopy support completely through one sewn tunnel ➊.
2.Slide straight end of a second support into the straight end of the first support ➋.
➊
➋
3.On models with four canopy supports, repeat steps one and two for the other canopy tunnel. The canopy should appear as shown ➌.
➌
OR
➍
4. Attach canopy in the areas between the infant restraint and the handle base ➍.
To remove canopy, reverse the steps.
14
