6.2.1 3-Point Harness
5.Buckle harness to the latch between child’s legs. Make sure that you hear a “click.”
DO NOT use the infant restraint if the harness does not latch in place. Call Graco at
6.From the back, pull strap through
harness tightener to tighten the straps as shown ➊. CHECK that both straps are flat and tight on child’s shoulders.
7.Snap harness clip pieces together ➋. Position harness clip in middle of chest,
level with armpits and away from the neck ➌.
8.SAFETY CHECK:
a)CHECK that harness straps are not twisted.
b)CHECK that the harness is snug. A snug strap should not allow any slack. It lies in a relatively straight line without sagging. It does not press on the child’s
flesh or push the child’s body into an unnatural position ➌.
➊
➋
➌
34
