Graco PD117254B owner manual Airplane Use, Storing Latch

8.1 Airplane Use

When installing in an airplane using the

base, install the same way as in an automobile with a lap only belt leaving the lock off fully opened to allow for buckle

clearance. If using the shell only installing

follow the same instructions as an automobile. Notify the airline ahead of time that you intend to bring the seat on board.

Use only in forward-facing aircraft seat. Follow the flight attendants instructions about infant restraint placement.

Do not use this infant restraint if the airplane seat belt does not hold the infant restraint securely.

8.2 Storing LATCH

1. For ease of storing, extend LATCH to its maximum length.

2. Locate the storage bars on bottom of infant restraint base ➌.

3.Fasten connector (without

	adjustment belt) onto storage bar.	Storage bars	➌
4.	Repeat step 3 for connector with

adjustment belt. After fastening onto storage bar, pull on adjustment belt to make sure LATCH is securely fastened.

5. LATCH storage should look like this when complete ➌.

Underside of base

8.0 Additional Information

41