A. Push the harness adjustment button | ➌ | |
under the seat flap. Pull the shoulder | ||
straps out to loosen the harness ➌. |
| |
B. From behind seat, pull the metal |
| |
junction plate down behind the ownerÊs |
| |
manual pocket and remove the ends of |
| |
the two shoulder straps from the metal |
| |
junction plate ➍. |
| |
C. From front, pull straps through the | Harness adjustment | |
harness slots and then reinsert them | ||
button | ||
through the appropriate slots. Both | ||
| ||
harness straps must be through the |
| |
same set of slots in the seat and pad. | ➍ | |
D. From behind seat, push both shoulder | ||
straps UNDER ownerÊs manual pocket |
| |
and out the bottom ➍. |
| |
E. Depending on the size of your child, you |
| |
may need to adjust the harness straps or |
| |
waist straps as shown on pages |
| |
Reassemble the strap ends onto the metal |
| |
junction plate ➍. You will be able to use |
| |
various combinations of shoulder strap | Metal junction | |
loops and waist strap loops to get a snug | ||
fit for your child. | plate |
5.SAFETY CHECK:
a)CHECK that straps are not twisted in front or back;
b)CHECK that straps are secure by pulling on harness straps from the front of the seat.
21
