WEST BEND BREAD & DOUGH MAKER

L4978

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electrical shock and/or injury to persons including the following:

•Read all instructions before using.

•Do not touch hot surfaces. Use handles or knobs. Always use potholders or oven mitts to handle hot bread pan or hot bread.

•Do not put hand inside oven chamber after bread pan is removed. Heating unit will still be hot.

•To protect against electrical shock, do not place cord, plug or appliance in water or other liquid.

•Close supervision is necessary when any appliance is used by or near children.

•Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts and before cleaning appliance.

•Avoid contacting moving parts.

•Do not operate appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Return appliance to The West Bend Company for examination, repair or adjustment.

•The use of accessory attachments not recommended by The West Bend Company may result in fire, electrical shock or personal injury.

•Do not use outdoors.

•Do not let cord hang over edge of table or counter or touch hot surfaces.

•Do not place appliance on or near a hot gas or electrical burner, or in a heated oven.

•Do not use appliance for other than intended use.

•To disconnect power, press stop button to turn control off then remove plug from wall outlet. Never pull on the cord.

•Extreme caution must be used when moving appliance during operation.

SAVE THESE INSTRUCTIONS - Your bread maker needs no special care other than cleaning. If servicing becomes necessary, return your bread maker to The West Bend Company. See Warranty section in this booklet for service details. Do not attempt to repair it yourself. For Household Use Only. An off odor from motor may be noted with first use, which is normal and will disappear with use.

Electric Cord Statement - CAUTION: Your bread maker has a short cord as a safety precaution to prevent personal injury or property damage resulting from pulling, tripping or becoming entangled with the cord. Do not allow children to be near or use this bread maker without close adult supervision. If you must use a longer cord set or an extension cord when using the bread maker, the cord must be arranged so it will not drape or hang over the edge of a countertop or tabletop, where it can be pulled on by children or tripped over accidentally. To prevent electric shock, personal injury or fire, the electrical rating of the extension cord you use must be the same or more than the wattage of the bread maker (wattage is stamped on underside of bread maker).

Important Safety Instructions - This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not attempt to defeat this safety feature. Your West Bend® Bread & Dough Maker was designed for use with 120 volt, 60 Hz electrical service ONLY. Use of your bread & dough maker with a converter or transformer will destroy the electronic control and will void your warranty

TO PREVENT PERSONAL INJURY OR PROPERTY DAMAGE, READ AND FOLLOW THE INSTRUCTIONS AND/OR WARNINGS IN THIS CARE/USE INSTRUCTIONAL MANUAL.

IMPORTANT INFORMATION ON PROTECTING ELECTRONIC CONTROL - To Protect bread

maker’s electronic control against possible damage caused by surges in electrical power line, we recommend using a surge protector device, available in the electronics department of most discount/hardware stores. Simply plug surge protector into electrical outlet, then plug bread maker cord into receptacle of surge protector.

HELPFUL HINTS FOR SUCCESSFUL BREAD BAKING - To ensure great baking results in your West

Bend Bread Dough Maker, please take a few minutes to review the following tips and read the basic instructions in the

1

Page 2
Page 1
Image 1
West Bend L4978 important safety instructions West Bend Bread & Dough Maker, Important Safeguards
Page 2

L4978 specifications

West Bend L4978 is a powerful integrated circuit designed primarily for driving high-voltage and high-current loads. It is an essential component in various applications that require reliable and efficient power management. The L4978 offers a versatile and robust solution for a range of electronic devices, including power supplies and motor controllers.

One of the key features of the West Bend L4978 is its ability to handle wide voltage input ranges. It operates effectively within a voltage range of 8 to 40 volts, making it suitable for both automotive and industrial applications. This flexibility allows designers to incorporate the L4978 into diverse systems without the need for extensive redesigns.

Another significant characteristic of the L4978 is its high current output capability. It can deliver up to 1 amp of output current, allowing it to drive larger loads efficiently. This high current output is coupled with built-in thermal protection, ensuring the device remains operational even under challenging conditions.

The L4978 also integrates several advanced technologies that enhance its performance. For instance, it features a high-speed protection circuit that safeguards against overheating and overcurrent situations. This protection not only ensures the longevity of the device but also increases overall system reliability.

In terms of efficiency, the L4978 stands out with its low standby current consumption, making it an excellent choice for battery-operated devices. Its design minimizes energy wastage, which is crucial in applications where power efficiency is paramount.

Furthermore, the L4978 allows for easy implementation in various applications. It provides a simple configuration for both linear and switching power supplies, accommodating the needs of different designs without requiring extensive modifications.

In summary, the West Bend L4978 is a highly versatile integrated circuit designed for robust power management. Its wide voltage range, high output current capability, advanced protection features, and energy efficiency make it an ideal choice for a plethora of applications in the electronics industry. With its reliable performance and adaptability, the L4978 continues to play a crucial role in modern electronic design, supporting innovations across multiple fields.
Top Page Image Contents