Graco PD215585A manual

5.	To create a secure installation, while	›
	pushing down on the base, pull the free
	end of the lap belt or the shoulder portion
	of the lap/shoulder belt to tighten ›.
6.	Close lock-off over lap belt AND free end of the
	lap/shoulder belt œ.

NEVER allow any object other than the vehicle
belts to go under or interfere with the lock-off.
If any other part of the vehicle belt interferes
with the lock-off choose another seating location.
MAKE SURE that you push the top of the
lock-off all the way down.
7. Check that belt does not move by pulling
and pushing hard on base with hands near the
vehicle belt path. If belt loosens	œ
or lengthens, repeat procedure.
8. Push the child restraint down into the base and
make sure that you hear a “click” . Pull up on
the child restraint to be sure it	
is latched securely into the base.

If the child restraint does not securely latch into the base, the child restraint provides NO protection for your child. DO NOT use the child restraint/base if the child restraint does not securely latch into the base.

9. Test child restraint for secure installation as described in infant restraint “Final Safety Check” page 41.

29