Graco PD215585A manual Installing the Child Restraint and Base Using Vehicle Belt

6.2Installing the Child Restraint and Base Using Vehicle Belt

1.Make sure vehicle is on level ground in order to get the correct recline position.

2.Place the base in a rear-facing position on a forward-facing vehicle seat.

3.Push recline adjustment buttons ™ and slide into position 1 to access lock-off.

4.When using the base to install the infant restraint, the lock-off is ALWAYS used to secure both belts of the lap or lap/shoulder belt.

Open the lock-off and route the vehicle

belt through the vehicle belt path and over the lock-off š. Buckle the vehicle belt.

™

Lock-off š

Lap Belt	Lap/Shoulder
	Belt
	Belts MUST go
	under lock-off

28