Graco PD215585A manual How to Install the Child Restraint/Base

6.0How to Install the Child Restraint/Base

6.1Installing the Child Restraint Without

Base Using Vehicle Belt

You must carefully follow the instructions provided by your vehicle manufacturer, in addition to the information in this manual. Before proceeding be sure you have read and understood section 4, “Choosing an Appropriate Vehicle Seat Location” on pages 13-19.

Make sure the buckle tongue goes into the correct

buckle ™. The seat belt should not be twisted or turned.

™

Make sure vehicle is on level ground š	š
so that the level indicator can be used to
properly recline the child restraint.

Refer to your vehicle owner’s manual and the instructions in “4.2.2 SAFE Vehicle Belt

Systems”, page 16-18, on tightening your vehicle belt when using the child restraint without base.

If a front passenger seat is used (see air bag warning, page 4), slide the vehicle seat rearward as far as possible from the dashboard. If a rear seat is used, make

sure the seat in front of it is moved forward enough and is upright enough to allow room for the child restraint.

26