11.3 With LATCH

Use vehicle belt (not LATCH connectors) for installations with children weighing more than 48 pounds (21.7 kg). NOTE: Some vehicle manufacturers have lower ma[imum weight ratings for LATCH anchors so you must consult your vehicle owner’s manual or call the vehicle manufacturer to confirm the limits on your vehicle’s LATCH anchors.

1.Unhook LATCH from storage bars on the sides of the seat. For ease of installation e[tend LATCH to its ma[imum length.

2.Place the child restraint firmly against

the back of a forward-facing vehicle seat.

3. Hook LATCH Connectors to vehicle

™

lower anchors ™. Pull firmly on Connectors

 

to be sure they are attached. Belt must

 

lay flat and not be twisted.

 

4. Tighten LATCH by pushing down hard on

›

child restraint and pulling the adjustment belt š.

 

5. If you need to remove LATCH to readjust

 

push button on LATCH buckle ›

 

to loosen strap.

 

35

 

™

š

Page 35
Image 35
Graco PD246612A owner manual With Latch, Lay flat and not be twisted