3. Fasten harness clip š. Position harness

š

clip at middle of child’s chest level with

 

armpits.

 

4. Tighten the harness straps by pulling the adjustment strap on the front of the seat › .

5.Make sure straps are flat and snug against child’s shoulders and thighs. You should not be able to pinch œ the harness straps. A snug strap should not allow any slack. It lies in a relatively straight line without sagging. It does not press on the child’s flesh or push the child’s body into an unnatural position.

38

›

œ

Page 38
Image 38
Graco PD246612A owner manual