Graco TI1962A Dimensions, Wall Mount Hole Pattern, Torque Sequence

Dimensions

DimensionsWall Mount Hole Pattern

For Accessory Wall Mount Kit 245875

Torque Sequence

360mm (14.2 in.)

318mm

(12.5in.)

146mm

(5.7in.) 160mm

(6.3in.)

213mm (8.4 in.)

M8Mounting

Holes

AirInlet; see

page25 for

sizes.FluidInlet;

seepage 25

forsizes.

FluidOutlet;

seepage 25

forsizes.

TI1964A

TI1963A

100mm (4 in.)

260mm (10.25 in.)

TI2118

Four9 mm (0.35 in.)

diameterholes, to

mountthe bracket to

thewall

Twoholes to mount the bracket to the pump.

• Always follow torque sequence when

instructed to torque fasteners.

• Torque bolts twice to 20 N•m (15 ft-lb).

Contents

Main 311689G ENG Instructions/Parts List TRITON3D350HP Diaphragm Pump Used to pump waterborne and solvent-based paints and catalysts. Part No. 253707, Series D Part No. 253708, Series D Contents Page Warning Installation General Information Tighten Threaded Connections Mounting the Pump Wall Mount Installation Floor Stand Installation Air Line Fluid Suction Line Fluid Outlet Line Page Grounding Operation Pressure Relief Procedure Flush the Pump Before First Use Starting and Adjusting the Pump Pump Shutdown Maintenance Lubrication Flushing and Storage Tighten Threaded Connections Preventive Maintenance Schedule Troubleshooting Page Repair Prepare the Pump for Repair General Repair Notes Fault Indications Tools Required Replace the Diaphragms Page Repair the Air Valve Page Replace the Ball Check Valves Page Replace the Cylinder and Piston Seals Page Parts Part No. 253707 includes items 1-81 Part No. 253708 includes items 1-8,10-59, 61-81 35 Page Technical Data Performance Charts Dimensions Wall Mount Hole Pattern Torque Sequence For Accessory Wall Mount Kit 245875 Graco Standard Warranty Graco Information