Alternate Belt Removal and Installation
Removing Belt
a.Loosen engine bolts (21) to relieve tension on belt.
b.Slide belt off pulleys.
Installing Belt
a.Install belt (19) over small (6) and large (4) pulleys.
19
21
Hydraulic Pump Replacement
b.Tighten engine bolts (21). Torque to 225 + 10
c.Check belt (19) alignment on both large (4) and small pulley (6). When properly positioned over pulleys, belt should be centered on pulleys and completely over all grooves.
ti7834 | ti7837 |
Properly Aligned | Not Aligned Properly |
|
NOTE: If belt is not aligned properly, to adjust belt, slowly pull engine recoil while at the same time pushing or pull- ing belt to reposition over pulley.
4
6
ti7870
311283D | 21 |
