Graco Inc 253472 Changing Hydraulic Fluid Filter, Removal, Installation, Relieve pressure, page

Changing Hydraulic Fluid Filter

Changing Hydraulic Fluid Filter

Removal

1.Relieve pressure, page 5.

2.Loosen and remove hose (101) from fitting (103).

3.Remove filter housing (111) from reservoir (64).

4.Remove bottom filer cap (155) from housing (111).

5.Pull filter (108) off cap (155).

Installation

1.Install new o-ring (113) from kit.

2.Install new filter (108) over cap (155).

3.Install cap (155) and filter (108) in filter housing (111). Hand tighten cap till snug. Then torque to 375 + 10 in-lb (42 + 1.1 N•m).

4.Install filter housing (111) into reservoir.

5.Install fitting (103) in filter housing (111). Torque to 600 + 10 in-lb (67.8 + 1.1 N.m).

6.Reattach hose (101) to fitting (103). Torque to 450 + 10 in-lbs (51 + 1.1 N•m).

101

103

111

108

113

155

ti7763

26 311283D