308–293 17
Daily
Gun Care, Flushing, and Cleaning
14. Trigger
the gun while you install the fluid nozzle
(20) with the gun wrench (35).
CAUTION
When tightening the nozzle, do not exceed 35 in-lbs
(4 N
S
m) torque. Over-tightening the nozzle can
cause the nozzle hex to round, can af
fect the spray
pattern, and is unnecessary to guarantee a seal.
15.
Install the air cap ring (12) and air cap (19).
Fig. 9 02060A
35 20
12, 19
16.
Dampen a soft cloth with solvent and wring-out the
excess. Point the gun down and wipe of
f the
outside of the gun.
Fig. 10 02063
17.
After cleaning the gun, lubricate the following parts
with lubricant 1
1
1–265 daily:
D
Fluid adjustment knob threads
DT
rigger pivot pin
D
Fluid needle shaft; refer to the
Service
section
to remove and reinstall the needle
NOTE:
See Accessories to order lubricant 1
11–265.
Fig. 11 02019
Lubricate
Lubricate