Engine
Engine
(Figure 4)
Removal
NOTE: All service to the engine must be performed by an authorized HONDA dealer.
1Relieve pressure, page 7.
2Remove Fan Belt, page 10.
3Loosen motor nut (205). Swing motor retainer bracket
(204)out.
4Remove engine (119) and rocker plate (99) from sprayer.
5Remove four screws (23), washers (7) and nuts (24) and remove rocker plate (99), dampeners (153) and washers
(154)from engine (119).
TIA
Installation
1Install rocker plate (99), dampeners (153) and washers
(154)on engine (119) with four screws (23), washers (7) and nuts (24); torque to 125
2Install engine and rocker plate (99) on sprayer.
3Swing motor retainer bracket (204) in. Tighten motor nut
4Install Fan Belt, page 10.
FIG. 4
311797J | 13 |
