Hydraulic Oil/Filter Change
Hydraulic Oil/Filter Change
(Figure 6)
Removal
1Relieve pressure, page 7.
2Place drip pan or rags under sprayer to catch hydraulic oil that drains out.
3Remove drain plug (2). page 26. Allow hydraulic oil to drain.
4Unscrew filter (227) slowly - oil runs into groove and drains out rear.
Installation
1Install drain plug (2) and oil filter (227). Tighten oil filter 3/4 turn after gasket contacts base.
2Fill with five quarts of Graco hydraulic oil 169236 (5 gallon/20 liter) or 207428 (1 gallon/3.8 liter).
3Check oil level.
TIA
FIG. 6
16 | 311797J |
