Daily Gun Maintenance
Clean Nozzle and Air Cap
1.Remove air cap (13), trigger gun, remove nozzle (11), and soak both in a compatible cleaning solution.
CAUTION
Trigger the gun whenever you tighten or remove the nozzle. This keeps the needle tip away from the nozzle seating surface and prevents the tip from being damaged.
2.Clean air cap, nozzle, and front of the gun with a
3.Use a soft implement, such as a toothpick, to clean out air cap holes.
4.Trigger the gun while you install the fluid nozzle with the gun tool. Tighten the nozzle securely to
5.Install the retaining ring (14) and air cap (13).
When reassembling, make sure the
air cap matches the color etched onto the side of the nozzle (gold, brown, grey, blue, etc.).
6.After cleaning the gun, lubricate the follow- ing parts with lubricant 111265 daily:
•fluid control valve threads
•trigger pivot pin
•fluid needle shaft
Compliant Cleaning Methods
1.Place spray gun in a gun washer that com- pletely encloses the gun and components during cleaning, rinsing, and draining.
2.Spray solvent through the spray gun into a closed gun cleaning station.
10 | 312579H |
