~A~~~~~
HIGH PRESSURESPRAY CAN CAUSE SERIOUS INJURY. FOR PROFESSIONAL USE ONLY. OBSERVE ALL WARNINGS.
Read and understand allinstruction manuals before operating equipment.
FLUlD 1NJECTlON HAZARD
General Safety
This pressure washer generates very high fluid pressure. Spray from the gun, leaks or tuptured components can injectfluid through yourskin and into your body and cause extremelyserious bodily injury includingthe need for amputation. Also,fluid injectedor splashed intothe eyes or on theskincan cause serious damage.
NNER pointthe spray gun or wand at anyone or at any part of the body.N N E R put hand or fingers over the spray tip.
ALWAYSfollow the Pressure Relief Procedure,before cleaning or servicing any part of the sprayer.
N N E R try to stop or deflect leaks with your hand or body.
Be sure equipment safety devices are operating properly before eachuse.
Medical Treatment
If any fluid appears to penetrate your skin, get
EMERGENCY MEDICALTREATMENTATONCEDO. NOTTREAT ASA SIMPLECUT. Tell the doctor exactly
what fluid was injected.
NOTE TO PHYSICIAN injection inthe skin is a traumatic injug It IsImportantto treat theInJury surgically as soon as possible. Do not delay treatment to research toxiciv. Toxicify is a concern with .some exotic- coatings injected direct& into the bloodstream. Consultationwirb a plastic surgeon or reconstructive hand surgeon may be advisable.
Pressure Relief Procedure
To reduce the riskof seriousbodily injury,includingfluid injection and splashing in the eyes or on the skin, always follow this procedure whenever you stop spraying for more than10minutes, when shutting down, and before checking or repairing any part of the system.
1.Engage the trigger safety latch.
2. Thm the sprayeroff.
3.Disconnect theelectricalsupply.
4.Shut off the water supply.
5.Disengage the trigger safetylatch and trigger the gunto relieve pressure, and then engage the trigger safety latch again.
6.Before
Spray Gun Safety Devices
Be sure all gun safety devices are operating properly before eachuse. Do not remove or modity any part of
the gun; this can cause a malfunction and resultin serious bodily injury.
SAFEIY LATCH: Whenever you stop spraying for a moment, always set the gun safety latchinthe engaged or"safe" position, making thegun inoperativeFailureto. properly set the safety latch can resultin accidental triggering of the gun.
SPRAY TIP SAFm. Use extreme caution when cleaning or changing spray tips. If a spray tip clogs while spraying, engage the gun safety latch immediately. ALWAYS follow the Pressure Relief Procedure and then remove the spraytip to cleanit.
2
