Indy-X Chop | Graco Inc GC-1388G instruction

Operation

Indy-X Chop

GC-1388G

ENG

Low emission external-mix dispense gun for use with polyester resin and gel coat.

For professional use only.

Maximum fluid working pressure: 2000 psi (14 MPa, 138 bar)

Maximum air pressure: 100 psi (0.7 MPa, 7 bar)

Important Safety Instructions

Read all warnings and instructions in this manual. Save these instructions.

Image 1

Graco Inc GC-1388G important safety instructions Indy-X Chop

Contents

Indy-X Chop Contents Fire and Explosion Hazard Skin Injection Hazard Methyl Ethyl Ketone Peroxide Mekp Important Safety InformationPolyester Resins and Gel-Coats Spraying and Lamination Operations Grounding Hose Attachment Set-Up Standard Equipment PartsPart Description Part Description Number Indy X Chop Dispense Gun Assembly Drawings Assembly Drawings Assembly Drawings Assembly Drawings Part Description Qty Number Indy X Chop Parts List Description Qty Daily Maintenance Pressure Relief Procedure Parts Replacement Procedure Maintenance Needle & Pin Removal Procedures Needle Test Needle & Pin Reassemble Procedure Trigger & Needle Guard Readjustment Procedure Packing Nut Adjustment Procedure Impingement Dispense Tips Part Orifice Min Max OptionsWidth Output lbs Part Orifice Number Part Orifice Category Data Technical Data Graco Ohio Information Graco Ohio Standard Warranty