Transport cap

In case of power failure or trans- port: Disconnect the quick connec- tor and cap the mattress with the transport cap to slow deflation.

CPR function

If CPR must be performed on the patient while the mattress is in use, to immediately deflate the mat- tress, either:

1. Pull the CPR valves from the mattress in the location of the arrow shown at right, or

2. Disconnect the quick connector from the pump in the location of the arrow shown at right.

Maintenance

quick connector

transport cap

Cleaning

Perform the following cleaning procedures before use.

Pump: Wipe the pump with a clean, damp cloth and mild detergent, and keep it away from dust. Air dry.

sCaution: Do not use corrosive or powdered cleansers to clean the pump.

sCaution: Do not immerse or soak the pump.

sCaution: Do not clean with phenolic products.

Mattress: Wipe the mattress unit with a clean, damp cloth and mild detergent. The mattress may also be cleaned us- ing a 10% solution of sodium hypochlorite (bleach) diluted in water. Air dry all parts thoroughly before use.

sCaution: Do not clean with phenolic products.

sCaution: After cleaning, air dry the mattress without direct exposure to sunlight.

12

760000-INS-LAB-RevA08

Page 12
Image 12
Graham Field 760000-INS-LAB-RevA08 user manual Maintenance, Transport cap, CPR function, Cleaning