SET-UP
Note: Before initial operation, clean the nebulizer cup as- sembly following the instructions given in MAINTENANCE/ Cleaning the Nebulizer Cup.
WARNING: Ensure that the nebulizer compressor is un- plugged during
1.Before each use, inspect the compressor and nebulizer cup assembly for damage or wear; replace as needed.
2.Place the compressor on a table or other flat stable sur- face (not on the floor), in an area that is clean and dust- free. Be sure you can easily reach the controls when seated.
3.Open the nebulizer medication cup: Twist the cap coun-
4.Pour the prescribed medication into the nebulizer medi-
cation cup. Do not fill with | more than 5 ml per treat- |
ment. | cap |
5.Install cap on cup. Turn clockwise to tighten.
cup
install cap
on cup
6.If using the mouthpiece for treatment, proceed to step 7. If using a mask, install the bottom part of the mask directly onto the top of the nebulizer medication cup cap as shown at right. Proceed to step 9.
7.Insert mouthpiece into large end of T adapter.
mask 
cap
install mask
on cap
Tadapter mouthpiece
assemble
mouthpiece
and T adapter
