3.Insert lower pole into pole base.
4.Assemble M8 screw, small washer, and large washer as shown on previous page. Install from the bottom through base into pole base. Use 9/16" wrench to tighten.
5.Insert spring into lower pole.
6.Insert upper pole into lower pole.
7.Install height adjustment knob in upper pole. Adjust upper pole to desired height. Turn knob clockwise to tighten.
8.Install basket on upper pole; insert two M4 screws to secure it as shown on previous page. Use Phillips screw- driver to tighten screws.
9.Install lower bracket on upper pole; insert two M6 screws and washers to secure it as shown on previous page. Use Phillips screwdriver to tighten screws.
10.Slide sphygmomanometer's upper bracket into lower bracket.
Ensure that sphygmomanometer is assembled as de- scribed, and that all components are securely fastened, before use.
Adjust height: Turn the height adjustment knob counter- clockwise to loosen it, move upper pole to desired height, then turn knob clockwise to tighten.
BLOOD PRESSURE
Blood Pressure is a measure of the blood’s pressure in the circulatory system, which changes constantly during the course of the cardiac cycle. Blood pressure readings report two values. The higher reading (systolic pressure) shows the highest pressure in the arteries occurring when the heart contracts. The lower reading (diastolic pressure) shows the lowest pressure in the arteries, which occurs right before the heart contracts. Blood pressure readings
Labtron 223B / V223 Mobile Adjustable Aneroid Sphygmomanometer |
