CAUTION:Whileit is possible for one person to assemble this fireplace, obtain assistance from another person when handling some of the larger, heavier pieces, especially base assembly.
Before assembling the fireplace, use the parts list to check that all necessary parts have been included. Inspect the fireplace for damage as you proceed. Do not assemble or operate the fireplace if it appears damaged. If you have questions during the assembly process call
Remove all parts and hardware from carton. Refer to the parts list and hardware pack illustrations and assemble the fireplace on a protective work surface to avoid scratching the surfaces.
Tip for movement
LockerA
Push Locker Aand lifta handle.
Push Locker B and pull the handle forward.
Locker B
HAssemble four screens onto the Base Assembly
1. | See _ | Align the hole at the Screen A with the hole on the Base Assembly. Tighten | securely | using screw |
| provided. |
|
|
|
2. | See _r_ | Align the hole on Screen B with the hole on the Base Assembly. Tighten | securely | using screw |
| provided. NOTE: Screen A should be positioned inside of Screen B as shown. |
|
| |
3. | Repeat step 2 to assemble the Screen C and D onto the Base assembly. |
|
| |
4. | See _ | Insert the screw provided intothe hole on Screen B and align. Insert the screw through the hole in | ||
| Screen A. Tighten the provided nut securely. |
|
| |
5. | Repeat step 4 on the other three Screens. |
|
| |
Screw
Qty. 20
Ref. #$115G03082
Screen
©
Nut
Qty. 16
Ref. #$313G03062
8
