Grandstream Networks GXW410X

Grandstream Networks, Inc. GXW410x User Manual Page 17 of 35

Firmware Version 1.3.4.13 Last Updated: 3/2012

ia TFTP Serve

If selected, the GXW410x will attempt to retrieve new configuration file or new code image from

the specified TFTP server at boot time. It will make up to 5 attempts before timeout and then it

will start the boot process using the existing code image in the Flash memory. If a TFTP server is

configured and a new code image is retrieved, the new downloaded image will be verified and

then saved into the Flash memory.

Note: Please do NOT interrupt the TFTP upgrade process (especially the power supply) as this

will damage the device. Depending on the network environment this process can take up to 25

or 30 minutes.

ia HTTP Serve

The URL for the HTTP server used for firmware upgrade and configuration via HTTP.

For example, ttp://provisioning.mycompany.com:6688/Grandstream/1.0.0.54

Here “:6688” is the specific TCP port that the HTTP server is listening at, it can be omitted if using

default port 80.

Note: If Auto Upgrade is set to No, GXW410x will only do HTTP download once at boot up.

Firmware Server

Path IP address or domain name of firmware server.

Config Server

Path IP address or domain name of configuration server.

Firmware File

Prefix Default is blank. If configured, GXW410x will request firmware file with the prefix. This setting is

useful for ITSPs. End user should keep it blank.

Firmware File

Postfix Default is blank. End user should keep it blank.

Config File

Prefix Default is blank. End user should keep it blank.

Config File

Postfix Default is blank. End user should keep it blank.

Allow DHCP

Option 66 to

override server

Default value is No. If set to Yes, configuration file will originate from the DHCP server.

Automatic

Upgrade Choose Yes to enable automatic upgrade and provisioning. In “Check for new firmware every”

field, enter the number of minutes to enable GXW410x to check the server for firmware upgrade

or configuration. When set to No, GXW410x will only do upgrade once at boot up. Other options

are:

“ Always check for New Firmware.”

“ Check New Firmware only when F/W pre/suffix changes”

“ Always skip the Firmware check”

Authenticate

Conf File If set to Yes, config file is authenticated before acceptance. This protects the configuration from

an unauthorized change.

DTMF Payload

Type This parameter sets the payload type for DTMF using RFC2833. Default is 101.

Syslog Serve

The IP address or URL of System log server. This feature is especially useful for ITSP (Internet

Telephone Service Provider)