.
55
Configuring the Secure Router 4134 for remote access
You must connect a local terminal and log on to the Secure Router 4134 to initially configure the system.
Connecting a terminal for local access
You use the console port to initially configure the system. The following figure shows the location of the console port on the rear panel of the Secure Router 4134.
Figure 6
Connecting a terminal to the Secure Router 4134 console port
To access the command line interface (CLI) using the rear panel console port, connect a terminal or a workstation that runs terminal emulation software to the Secure Router 4134 using the console cable that ships with the unit.
Nortel Secure Router 4134
Quick Start
18 February 2008
