46Installing the Secure Router 4134 chassis and hardware components

5Use a Phillips screwdriver to tighten the two captive screws that secure the Small Module to the Voice Carrier Medium Module.

--End--

Connecting power cables

The following two types of power supply modules are available for the Secure Router 4134:

AC power supply module (standard or PoE) requiring an external AC power source

DC power supply module requiring an external DC power source

Use the procedures in this section to connect AC and DC power cables to a Secure Router 4134.

Connecting AC power cables

Average time to install one AC power cable: 1 minute.

CAUTION

ESD

Always wear an ESD-preventative wrist strap when you connect cables or perform maintenance on a Secure Router 4134. Ensure that the wrist strap makes contact with your skin.

CAUTION

ACHTUNG

ESD

Um Schäden durch elektrostatische Entladung zu verhindern, tragen Sie bei der Instandhaltung dieses Produkts immer ein antistatisches Band am Handgelenk, das mit einer ESD-Buchse verbunden ist. Stellen Sie sicher, dass das Band am Handgelenk Kontakt zur Haut hat.

Prerequisites

Ensure you have one or two appropriately rated AC power cords, depending on your configuration. Power cords ship with the Secure Router 4134 chassis.

Ensure the power cord or cords are long enough to plug the male end into a standard 110/220 V AC power outlet.

Nortel Secure Router 4134

Quick Start

NN47263-100 02.01 Standard

18 February 2008

Copyright © 2007, 2008 Nortel Networks

Page 46
Image 46
Nortel Networks 4134 quick start Connecting power cables, Connecting AC power cables