Nortel Networks 4134 quick start Installing the chassis

34Installing the Secure Router 4134 chassis and hardware components

Procedure steps

Step Action

1Select one of the six possible rack-mounting positions on the sides of the Secure Router 4134.

2Use a #2 Phillips screwdriver to attach a bracket to the desired mounting position on one side of the Secure Router 4134.

3Torque the mounting bracket screws to 3 to 6 in-lb (0.339 to 0.6779 N-m).

4Attach the second bracket to the corresponding position on the opposite side of the Secure Router 4134.

--End--

Installing the chassis

Install the Secure Router 4134 in a standard equipment rack (19 in; 48.26 cm).

Average time to install the Secure Router 4134 chassis in an equipment rack: 2 minutes.

ATTENTION

You must install the Secure Router 4134 in a restricted-access location. You must limit access to the Secure Router 4134 to authorized service personnel only.

ATTENTION

Nortel recommends that you install the chassis (including the power supplies and fan tray) in the equipment rack before you install the ground lug and the optional external interface modules.

WARNING

Do not install the Secure Router 4134 near a standing or running water source or in a high-humidity environment.

WARNING

WARNUNG

Installieren Sie den Secure Router 4134 nicht in der Nähe von stehenden oder fließenden Gewässern oder in einem Gebiet mit sehr hoher Feuchtigkeit.

Nortel Secure Router 4134

Quick Start

NN47263-100 02.01 Standard

18 February 2008

Copyright © 2007, 2008 Nortel Networks