Installing the interface modules 43
2Loosen the captive screw at the top of the center slot module guide.
3Remove the center slot module guide. The following figure shows the removal of the center slot guide.
4Align the Large Module with the slot and the slot module guides on the outside edges of the slot.
5Slide the module into the chassis until its connector panel touches the chassis back panel.
6Push gently, but firmly, to seat the connector on the interface module in the chassis back panel.
7Ensure the levers on the module are flush with the front panel of the Secure Router 4134.
8Use a Phillips screwdriver to tighten the two captive screws to secure the module to the chassis.
Installing a Small Module in the Voice Carrier Medium Module
Ensure you securely install the Voice Carrier Medium Module in the Secure Router 4134 chassis before you install Small Modules in the Voice Carrier Medium Module. For instructions to install the Voice Carrier Medium Module in the chassis, see “Installing a Medium Module” (page 42).
If you are working with 2- or
17)and “Foreign Exchange Office (FXO) Interface Modules” (page 18).
Nortel Secure Router 4134
Quick Start
18 February 2008
