|
| Verifying a successful installation 53 | |
|
|
|
|
Table 3 |
|
|
|
Secure Router 4134 LED behavior at |
|
| |
|
|
|
|
Front panel LEDs | Rear panel LEDs |
| Description |
|
|
|
|
| SYS |
| Illuminate red, and then green |
|
|
|
|
| FAN |
| Illuminate red, and then green |
|
|
|
|
| PS0 and PS1 |
| Illuminate green for each |
|
|
| power supply module that is |
|
|
| installed. |
|
|
|
|
| SM and MM |
| Illuminate green if Small and |
|
|
| Medium Modules are installed. |
|
|
| The MM LED also monitors a |
|
|
| Large Module, if installed. |
|
|
|
|
Module status and link status |
|
| Illuminate in various states |
LEDs |
|
| until you configure the Secure |
|
|
| Router 4134 for specific |
|
|
| network line conditions. |
|
|
| Generally, the status LEDs on |
|
|
| interface modules illuminate |
|
|
| yellow initially, and then green. |
|
|
| The link status LEDs illuminate |
|
|
| green, but turn off if there is no |
|
|
| link |
|
|
|
|
Ports GE 0/1, GE 0/2, GE 0/3, |
|
| LEDs illuminate if a link is |
and GE 0/4 |
|
| present and established. |
|
|
| |
As a general rule, an LED illuminates green for items that you installed. If the SM and MM LEDs | |||
on the rear panel of the Secure Router 4134 do not illuminate green, refer to the LEDs on the | |||
modules to identify issues. |
|
|
|
|
|
|
|
3.The logon prompt appears on the console screen.
Nortel Secure Router 4134
Quick Start
18 February 2008
