Nortel Networks 4134 quick start Connecting DC power

Connecting power cables 47

Procedure steps

Step Action

1Insert the female end of an appropriately rated AC power cord in the AC receptacle on the rear panel of the Secure Router 4134, as shown in the following figure.

2Insert the male end of the power cord in a standard 110/220 V AC power outlet.

CAUTION

Ensure you use an appropriately rated AC power cord only. Do not use an extension cord.

CAUTION

ACHTUNG

Stellen Sie sicher, dass Sie nur ein angemessen bewertetes Netzkabel für Gleichstrom verwenden. Verwenden Sie kein Verlängerungskabel.

--End--

Connecting DC power

The following figure shows the location of the terminal block on the DC power supply module.

Nortel Secure Router 4134

Quick Start

NN47263-100 02.01 Standard

18 February 2008

Copyright © 2007, 2008 Nortel Networks