HandyTone-386 User Manual Grandstream Networks, Inc.
17
MAC Address The device ID, in HEX format. This is a very important ID for ISP
troubleshooting.
WAN IP Address This field shows WAN port IP address.
Product Model This field contains the product model info.
Software Version Program: This is the main software release, its number is always used for
firmware upgrade.
Bootloader: This is normally not changed.
HTML: This is the web user interface, normally not changed.
VOC: This is the codec program, normally not changed.
System Up Time This field indicates how long the device has been up since the last reboot.
Registered This field indicates whether the device is registered to the SIP server.
PPPoE Link Up This field shows whether the PPPoE connection is enabled or not.
Detected NAT Type This field shows what kind NAT the HandyTone is connected to via its
WAN port. It is based on STUN protocol.
6.2.3 Advanced User Configuration
To login to the Advanced User Configuration page, please follow the instructions in section 6.2.1 to
get to the following login page. The password is case sensitive and the factory default password for
Advanced User is “admin”.
Grandstream Device Configuration
Password
Login
All Rights Reserved Grandstream Networks, Inc. 2004
Advanced User configuration includes not only the end user configuration, but also advanced
configuration such as SIP configuration, Codec selection, NAT Traversal Setting and other
miscellaneous configuration. Following is a snap shot of the advanced configuration page.
Grandstream Device Configuration