HandyTone-386 User Manual

Grandstream Networks, Inc.

7Software Upgrade

7.1Upgrade through HTTP (pending)

To upgrade software, HandyTone-386 can be configured with an HTTP server where the new code image file is located. For example, following URL in the HTTP Upgrade Server:

http://firmware.mycompany.com:6688/Grandstream/1.0.0.4

Where firmware.mycompany.com is the FQDN of the HTTP server, “:6688” is the TCP port the HTTP server listening to, “/Grandstream/1.0.0.4” is the RELATIVE directory to the root directory in HTTP server. Thus, you can put different firmware into different directory as well.

Note: For HTTP firmware upgrade, if “Auto Upgrade” field is set to “No”, HTTP firmware upgrade will be performed once. If “Auto Upgrade” is set to “Yes”, the ATA will check the HTTP server in the number of days that is defined in “Check for new firmware every” field.

7.2Upgrade through TFTP

To upgrade software, HandyTone-386 can be configured with a TFTP server where the new code image is located. The TFTP upgrade can work in either static IP or DHCP mode using private or public IP address. It is recommended to set the TFTP server address in either a public IP address or on the same LAN with the HandyTone-386.

There are two ways to set up the TFTP server to upgrade the firmware, namely through voice menu prompt or via the HandyTone-386’s Web configuration interface. To configure the TFTP server via voice prompt, follow section 5.1 with option 06, once set up the TFTP IP address, power cycle the ATA, the firmware will be fetched once the ATA boots up.

To configure the TFTP server via the Web configuration interface, open up your browser to point at the IP address of the HandyTone-386. Input the admin password to enter the configuration screen. From there, enter the TFTP server address in the designated field towards the bottom of the configuration screen.

Once the TFTP server is configured, please power cycle the HandyTone-386.

TFTP checking is only performed during the initial power up. If the configured TFTP server is found and a new code image is available, the HandyTone-386 will attempt to retrieve the new image files by downloading them into the HandyTone-386’s SRAM. During this stage, the HandyTone-386’s LED will blink until the checking/downloading process is completed. Upon verification of checksum, the new code image will be saved into the Flash. If TFTP fails for any reason (e.g., TFTP server is not responding, there are no code image files available for upgrade, or checksum test fails, etc), the HandyTone-386will stop the TFTP process and simply boot using the existing code image in the flash.

TFTP process may take as long as 1 to 20 minutes over the Internet, or just 20+ seconds if it is performed on a LAN. Users are recommended to conduct TFTP upgrade in a controlled LAN environment if possible. For those who do not have a local TFTP server, Grandstream provides a

28

Page 28
Image 28
Grandstream Networks HandyTone-386 user manual Software Upgrade, Upgrade through Http pending, Upgrade through Tftp

HandyTone-386 specifications

Grandstream Networks, a prominent player in the VoIP (Voice over Internet Protocol) industry, offers a range of innovative communication solutions. Among its noteworthy products is the HandyTone-386, a versatile analog telephone adapter (ATA) that seamlessly connects traditional analog telephones or fax machines to an IP network. This device is ideal for both home and office use, making it a popular choice for users looking to upgrade their telephony system without replacing existing hardware.

The HandyTone-386 is characterized by its compact design and user-friendly interface. It features two FXS ports, allowing users to connect two separate analog devices, such as home phones or office lines. This dual-port configuration enables simultaneous usage, ensuring that both lines can operate without interference, making it an efficient solution for small businesses or multi-line households.

One of the standout features of the HandyTone-386 is its support for multiple voice codecs, including G.711, G.726, and G.723. These codecs ensure high call quality by adapting to varying network conditions. Additionally, the device supports both SIP and IAX2 signaling protocols, providing flexibility in network configuration and interoperability with various VoIP service providers.

Security is a critical concern in today's digital landscape, and Grandstream addresses this with robust security features in the HandyTone-386. It offers encryption protocols such as SRTP for voice calls and TLS for signaling, protecting sensitive communications from potential threats and eavesdropping.

The HandyTone-386 also comes equipped with advanced telephony features, including caller ID, call waiting, three-way calling, voicemail, and call transfer capabilities. These features enhance the overall user experience and provide more functionality than traditional landline systems.

Moreover, the device’s simple web-based management interface simplifies setup and configuration, allowing users to manage their devices easily. It also supports DHCP for dynamic IP assignment and can be configured for static IP settings if required.

In conclusion, the Grandstream Networks HandyTone-386 exemplifies a powerful tool for those looking to modernize their telephony experience while leveraging existing analog equipment. With its dual FXS ports, support for multiple codecs, comprehensive security, and advanced features, the HandyTone-386 remains a reliable choice for users seeking flexibility, quality, and ease of use in their voice communication needs. Whether for personal or business use, this ATA serves as a gateway to the world of VoIP technology.