Grandstream Networks HandyTone-496

HandyTone-496 User Manual Grandstream Networks, Inc.

WAN port 0 LAN IP LAN port 0 Protocol UDP Only

WAN port 0 LAN IP LAN port 0 Protocol

UDP Only

Update Cancel Reboot

End User

Password This contains the password to access the Web Configuration Menu. This

field is case sensitive.

IP Address There are 2 modes under which the HandyTone ATA can operate:

- If DHCP mode is enabled, then all the field values for the Static IP mode

are not used (even though they are still saved in the Flash memory.) The

HandyTone ATA will acquire its IP address from the first DHCP server it

discovers from the LAN it is connected.

To use the PPPoE feature the PPPoE account settings need to be set. The

HandyTone will attempt to establish a PPPoE session if any of the PPPoE

fields is set.

- If Static IP mode is enabled, then the IP address, Subnet Mask, Default

Router IP address, DNS Server 1 (primary), DNS Server 2 (secondary) fields

will need to be configured. These fields are reset to zero by default.

Time Zone This parameter controls how the displayed date/time will be adjusted

according to the specified time zone.

Device Mode To use the device as a router or a bridge.

Cloned WAN MAC

Address: Allow the user to set a specific MAC address. Set in Hex format

LAN Subnet Mask

Sets the LAN subnet mask. Default value is 255.255.255.0

Daylight Savings Time This parameter controls whether the displayed time will be daylight savings

time or not. If set to “Yes”, the displayed time will be 1 hour ahead of

normal time.

LAN DHCP Base IP:

Base IP for the LAN port which functions as a Gateway for the subnet.

Default value is 192.168.2.1